Sometimes a side view mirror on your Ford F150 truck may be broken or you just want to swap it out for a different style. If this is the case, it is fairly easy to replace the mirror. All you need are some basic tools, mechanical aptitude, and a few hours of free time. Although there aren’t any specific instructions for replacing a side view mirror on a Ford F150, the procedure is straightforward.
Start by taking off the door switch panel. The switch panel houses the mirror nuts and clips and is connected to the arm of the door. Carefully pry off the door switch panel by using a flathead mini screwdriver. Next, unscrew the red reflector that covers the door lamp. The mirror will slide out from behind the reflector. Remove the first screw located behind the reflector. The second screw will be in the space behind the switch panel.
First, remove the mirror’s retaining nuts or bolts. Then, pull out the mirror’s glass. Be sure to check that the replacement mirror has the correct bulb before you proceed. Once you’ve done this, you’re ready to replace the mirror. Make sure to wear gloves, as the glass in the mirror may splinter. Remove the panel carefully, as it may throw small pieces of glass.
How Do You Change the Mirrors on a Ford F150?
First, dismantle the door panel. Remove the speaker and door panel, then the side mirror assembly. Next, remove the nuts and bolts holding the mirror assembly to the door panel. You will also need to remove the plastic cover. The plastic cover looks like the sail on a sailboat. Disconnect the wiring harness from the mirror. Install the new mirror in reverse order, reattaching the door panel and trim.
To adjust the mirrors, use the buttons on the console. The buttons on the console will turn up or down. Then, tilt your head over the centre console to adjust the mirrors. Next, remove the mirror mounting studs using a socket set. If the mirror does not align correctly, the switch will not work. You will need to remove the mirror mounting nuts. After that, disconnect the wiring harness from the power accessories.
To disconnect the power switch panel, remove the door arm. The panel connects to the door arm by clips. Carefully pull the door arm until the panel comes free. Then, pop off the red reflector to remove the mirror. Once the reflector is removed, pull the door panel away from the door frame using the handle. The new mirror should now be lined up with the socket. Continue this process until the panel is secure.
How Much Does an F150 Mirror Cost?
Many Ford F150 owners choose aftermarket mirrors in place of the factory-installed ones. These custom-fitted mirrors can add puddle lamps and turn signals and can cost up to $600. However, you can save money by repairing your factory-installed mirrors yourself. In this article, we’ll discuss some of the benefits of aftermarket mirrors for your F150.
Newer trucks feature mirrors that have cool features like built-in turn signals, defrost, and puddle lights. You can buy mirrors with similar functionality from an aftermarket company, such as SCITOO. They are highly functional and designed for proper fit and function. And since they come with warranty and excellent customer support, you can trust your purchase. What’s more, they’ll look good, too!
Depending on your model and location, an aftermarket side mirror may cost between $35 and $200. The labor for installation may cost up to $90. But keep in mind that not all damage requires a total replacement. If you’ve noticed chips, dents, or abrasions, you may only need a replacement part. If you’re planning on spending more than that, an aftermarket side mirror can save you money on labor.
How Do You Change a Mirror on a 2011 Ford F150?
To remove the side mirror, remove the door panel. Locate the speaker and switch panel behind the door lining. Pull the panel off. Next, unscrew the two 10mm nuts and bolts holding the mirror assembly in place. Be careful not to force the panel into place, as it can cause the mirror to break. Once the door panel is removed, follow the steps below to remove the side mirror.
If you’re replacing a side mirror, you’ll want to replace the glass with a new one. While you can get a new mirror from your Ford dealer, it’s usually best to purchase an OEM part to ensure the quality and longevity. Buying an aftermarket mirror is not only not guaranteed to last, but may also not match the mirror on the other side of your truck.
The mirror assembly is easily removed. Simply pry it out with a screwdriver. Then, use a folded cloth to push the new mirror onto the clips. This replacement takes about three minutes, but it’s worth it if you have no electrical experience. You’ll need a screwdriver, a hammer, and the correct screwdriver. You can also try to replace the mirror’s lights, which are connected by wires.
How Do I Take Apart My Side Mirror F150?
How Do I Remove My Side Mirror? In most cases, removing a side mirror will not require disassembling your car, but you can try if you are not sure what to do. Here are some steps to remove the door panel:
Remove the panel on the passenger side, first by unscrewing it. Then, remove the glass panel. It will be attached to the panel with plastic fasteners, which are easily removed with a screwdriver or other tool. Be careful not to split the panel or break it. If you do, you can replace it with a new one. Make sure to wear gloves when replacing a mirror, as the glass can splinter.
The replacement process will take about an hour, depending on the vehicle model and the level of mechanical ability. Typically, you will need a couple of basic tools, at least some mechanical aptitude, and about an hour to replace one side mirror. It is not a complicated process and can be done by nearly anyone with some mechanical aptitude. If you are using an aftermarket mirror, you should make sure it matches the original part on the other side of the truck.
How Do You Change the Mirror on a 2007 Ford F150?
The rear view mirror of your 2007 Ford F150 can be easily changed. To do this, start by detaching the connectors attached to the mirror’s light. Then, push the mirror out from its mounting bracket, making sure to push the glass firmly against the hinge. If it does not stay on properly, you may need to replace the whole panel. If you do not have the necessary tools or electrical knowledge, you can call a professional to change it for you.
Next, unscrew the two 10mm nuts and pull them apart. The speaker nut can be a little difficult to unscrew, so use plumber’s putty to keep it from coming out. After you’ve removed the speaker, you can easily replace the mirror. To reinstall the side mirror, follow the same steps as in the removal process. To remove the door panel, remove the inner lining of the door and remove the two screws holding it in place.
Can You Put F250 Mirrors on a F150?
There are many benefits to putting Ford F250 outside mirrors on your Ford F150. This type of accessory is very versatile, and you can rotate it 360 degrees to see behind your vehicle. The mirrors can also be set to almost any angle and can be installed easily. If you want to replace the outside mirrors on your truck, you will need to follow the following instructions carefully. Make sure to buy the right ones for your car.
If you are using power folding mirrors, you must first disable the automatic function that folds your mirrors. This feature works automatically when you start the ignition, but will often turn off after a few minutes. It also vibrates when you drive. It is also important to note that power folding mirrors do not stay in position while driving, and must be manually operated. To synchronize the mirrors, press the power fold button on the driver’s side door panel until you hear a click.
How Do You Remove Ford Mirror Caps?
There are two ways to remove your mirror cap. One way is to pry the mirror cap off with a credit card. You can break the thin plastic seal that holds the cap to the black mirror housing. You can also use a pry tool to pry the cap off. Either way will work, but a hammer will work best. If you have a hammer, you can use it to pry the cap off.
The first way to remove the cap is to take it off by unscrewing it from its mounting tabs. To avoid scratching the caps, you may want to use painters tape to protect them from damage. Alternatively, you can purchase a trim tool at a local harbor freight tool store. This type of tool will not scratch the black trim. Once you’ve removed the cap, make sure the heater element is disconnected. Repeat the process for the lower spot mirror.
Learn More Here:
4.) F150 History