If you need to change your shocks on your Ford F150, here are the steps to follow. To start, loosen the lug nuts on both sides of the vehicle. Use a jack stand or floor jack to raise and lower the front end. Remove the tie-rod from the spindle, if applicable. Then, loosen the bolts that secure the shocks to the frame.
The shocks in a Ford F150 are a vital part of the truck’s suspension system, absorbing the impact of road bumps and causing a slight dip in the front end. A broken shock will not dampen the truck properly, and may cause your vehicle to bounce around on potholes. If you feel excessive banging or squeaking or other noises while driving, it’s time to change the shocks.
Check the shocks in your Ford F150 on a regular basis. By checking them at regular intervals, you can extend their life significantly. It is recommended to change the shocks on your truck every 50,000 to 100,000 miles. Depending on how much you drive, you might not need to change shocks regularly if you drive your vehicle just for short distances. However, long distances will require you to replace your shocks more often.
Can I Change My Shocks Myself?
A broken or worn shock will not dampen your F150’s ride. The suspension and steering joints rely on the shocks to keep them in place. If you notice that your F150’s shocks need to be replaced, you should get them replaced as soon as possible. Broken shocks will also result in uneven tire wear. Changing your shocks is a relatively easy process.
First, remove the lug nuts on the front shock. You can loosen these bolts using an impact wrench with socket extension. If your shock is affixed with a horizontal bolt, you can remove the mounting bolts. Be sure to apply lubricant to the bolts that secure the shocks in place. After loosening the bolts, you can install new shocks.
To remove the old shocks, remove the two bolts that hold it in place. You may need to use a nut splitter or socket set to get the bolts out. After removing the nut, unscrew the bolts that hold the nut to the shock. If you’re having trouble with this process, you may need a professional help. If you’re a novice, the best way to get the job done is to watch the video tutorials on YouTube. They’re also useful for figuring out how to change shocks on your own.
When Should You Replace Shocks on F150?
Your Ford F150’s shocks should be checked regularly. If they are in good condition, they can last up to ten years. If not, you may want to consider replacing them sooner than later. Regular shock checkups will help you determine when to replace them. Listed below are some signs that your shocks need to be replaced. These symptoms may be the result of a leaking shock, a cup in the tread, or a lack of traction.
First, you must remove the old shock from the vehicle. To do this, you will need a jack to lift the back end of the truck and put it on jack stands. Remove the shock’s bolt by unscrewing it with a nut splitter or a socket set. To remove the bolt, use a penetrating solvent to loosen it. Once the bolts are unscrewed, you can remove the old shock from the vehicle.
Can You Replace Shocks Without Lifting?
In order to replace shocks on a Ford F150, you must first remove the lug nuts on both sides. You may also want to use jack stands to secure the suspension, but make sure to check the owner’s manual for the correct location of the jack. The shock is affixed to the frame with a bolt, either vertical or horizontal. To install a new shock, follow the steps described below, taking care to place the bolts in the correct location.
Once you remove the old shocks, you can now install new ones. Many aftermarket 6″ suspension lift kits include rear shocks as well. Unfortunately, the base-model shocks are white-body models and are not designed for real off-road use. Luckily, the Fox 2.0 Aluminum-Body Shock was developed in conjunction with BDS, and will fit your Ford F150 without lifting.
Can You Change Shocks And Struts Yourself?
Can You Change Shocks And Strut on Ford F150 yourself? It’s quite possible. You just need to know how to get into the engine compartment to access the suspension system. Remove the top shock bolt with an impact wrench and a socket extension. Unbolt the rest of the bolts until you can remove the shock and strut. Replace the old shock with a new one and tighten the bolts with a torque wrench.
To remove the old shock, unscrew the lock nuts on both sides. If you have a manual, you may need to check the manual. Once you’ve unlocked the shock bolts, remove the tie-rod from the spindle. Once you’ve removed the tie-rod, lift the truck up on jack stands. Remove the front tire, then disconnect the outer tie rod from the steering knuckle. You can now unscrew the two large nuts. The shock and strut should come apart easily.
Before attempting to change the shocks and struts, you should first learn how to use a spring compressor. The shocks are heavy, and you shouldn’t try to force them out with your hands. If you don’t have this tool, you may end up injuring yourself. Despite the risks, replacing the shocks and struts on your Ford F150 is a straightforward task that takes less than an hour.
Should I Replace All 4 Shocks at the Same Time?
To save money and restore the handling of your Ford F150, you can replace all four shocks at the same time. This is often the safer option, since replacing only two shocks could make the problem worse. However, you should still get the mechanic to replace all four shocks at the same time, as it is better for your car’s safety. It will also restore your car’s handling and peace of mind.
Shocks help with the suspension of your Ford F150 by absorbing the force of bumps and pot-holes. However, they can break down more quickly than you might think. To prolong their lifespan, you should avoid driving your truck on rough terrains and alternating between smooth and bumpy terrains every day. In addition, you should check your F150’s shocks regularly. This way, you will know when they’re time to be replaced.
To replace the shocks and struts on your Ford F150, you should consult with a qualified mechanic. Generally, shocks and struts should be replaced in pairs. It’s recommended that you replace the front and rear shocks at the same time, but it’s not necessary to do so. The alignment of your car might change after you replace the shocks and struts.
What Tools Do I Need to Change My Shocks?
To change the shocks on your truck, you need the right tools. To do so, you’ll need a wrench and a socket set. You can also use penetrating oil to loosen the bolts. To remove the shock bolt, you’ll need to unscrew it. Once you’ve loosen it, you can use penetrating oil to loosen the nut holding the shock.
Before changing your shocks on your Ford F150, make sure that you have the right tools. The shock tower bolts are located underneath the fabric in the trunk. Remove them by turning the bolt counterclockwise. To install the new shock, you’ll need a new rubber cushion and a washer, as well as the top nut and bolt. A new shock will come with a lifetime warranty, and you can replace it whenever it needs to be.
After you have the right tools, you’ll need to remove the old shocks. You’ll need an impact wrench with a socket extension to remove the top shock bolt. Next, unscrew all the other bolts. Then, you’ll need a torque wrench to tighten the new shocks. This step can be done on your own or with the help of a professional.
How Long Do Ford Factory Shocks Last?
How long do Ford factory shocks last? is a common question for Ford F150 owners. Shocks are a crucial component of your vehicle’s suspension system. They help absorb the force of road bumps. Changing the shocks in your F150 is an expensive process, so it’s worth knowing how to extend the life of yours. Ideally, you should have your vehicle’s shocks checked every 50,000 to 100,000 miles.
Shocks and struts typically last from five to ten years and 50,000 to one hundred thousand miles. The lifespan of suspension parts depends on many factors, including driving conditions, aggressiveness, and heavy loads. The first time you inspect your suspension is usually after 40,000 miles, but if you see any symptoms that suggest it is time for replacement, you should get it checked. Once you’ve had the vehicle inspected, you can make an informed decision on whether it’s time for a new shock or strut.
You should also consider replacing your Ford factory shocks with a new set if they fail. While these shocks may be cheaper than aftermarket ones, they’re not much better for your car’s performance. You’ll notice a difference in comfort and safety if you replace the shocks regularly. If you’re looking for a new set of shocks, Expert Car Care Inc. in West Allis, WI can help.
Learn More Here:
4.) F150 History